Sound and PA Systems
Audio distributed carefully and calibrated to the room — speakers, amplifiers and independently controlled zones, with echo and feedback treated, and optional links to the smart system and alarm.
Every zone with its own source and level from one panel - not one speaker blaring over a single table while the rest sit silent.
Sound is one of the most influential elements of a space and one of the least noticed. Nobody compliments a good sound system, but everyone notices a bad one: one speaker blaring over a single table while the rest sit silent, a sudden squeal when the microphone is raised, an announcement half the hall cannot make out. The difference is rarely the price of the equipment — it is distribution and calibration.
We install sound for restaurants, cafés, showrooms, event halls, mosques and offices, and we start from the space itself: its dimensions, ceiling height, and surface materials, since glass and marble reflect sound while carpet and curtains absorb it. That reading determines how many speakers, where they go, and what amplifier power is genuinely required, rather than an estimate.
Then we divide the space into independent zones. A dining room does not need the level the corridors need, and the back office does not need the music playing in the showroom. Zoning means separate control of each area from one panel, and it is what turns a set of speakers into an operational tool.
What we deliver
Room survey
Dimensions, ceiling height and reflective or absorptive surfaces assessed to determine speaker count, placement and required amplifier power before any equipment is bought.
Speaker supply and installation
Ceiling speakers for enclosed areas, wall-mounted for halls, weather-rated for terraces and courtyards — securely mounted with concealed, protected cable routes.
Amplifiers and sources
Amplifiers matched to actual load, plus sources, players and mixers, and wired or wireless microphones on channels that do not clash with other equipment in the building.
Audio zoning
The space divided into independent zones — dining, corridors, offices, exterior — each with its own level and source, controlled from a single panel.
Calibration and treatment
Frequency response tuned to the room and its surfaces, with echo, noise and microphone feedback treated so the sound arrives balanced at every point.
Paging and announcements
Public address for operational announcements, with automatic priority that ducks the music when an announcement starts and restores it afterwards without manual intervention.
Integration with other systems
Linked to the smart system to run on an automatic schedule, to the alarm to carry evacuation instructions, or to display screens in showrooms and halls.
Operation and maintenance
Your team trained on a simplified day-to-day panel, plus periodic maintenance covering speakers, connections and recalibration whenever the layout of the space changes.
How we work
- 1
Survey and listen
A visit during actual trading hours to measure ambient noise and understand how the space is used, not how it looks when empty.
- 2
Design and quote
A speaker and zone layout, an itemised equipment list with power ratings and prices, and alternatives where budget differs.
- 3
Install and cable
Cable runs, speakers and amplifiers installed, with routes concealed, protected and labelled for future maintenance.
- 4
Calibrate and hand over
Levels and frequencies set per zone, microphones and announcements tested, then team training and handover.
Serving clients across
We provide sound systems services to organisations across all regions of saudi arabia, through on-site visits and remote technical support.
Frequently asked questions
How many speakers does a 200 m² restaurant need?
There is no fixed number. As a working rule, balanced coverage under a three-metre ceiling needs roughly one ceiling speaker per 15 to 25 square metres, but that shifts with ceiling height, surface materials and ambient noise. More speakers at lower power almost always distribute better than a few at high power.
Why does our microphone squeal in the hall?
That squeal is feedback: speaker output returning into the microphone and amplifying in a loop. The fix is rarely just turning it down — it is microphone position relative to the speakers, the pickup pattern, and treating the frequencies where the loop occurs. Usually it is solved by repositioning and recalibration without changing any equipment.
Can different areas play different music?
Yes, and that is the point of zoning. Each zone takes its own source and level from the same system — quiet music in the dining room, paging only in the stockroom, silence in the back office.
Can the system work with the fire alarm?
It can be wired so that normal playback is interrupted and evacuation instructions are broadcast when the alarm triggers. We implement the link on the audio side; the specification and final acceptance of the alarm and evacuation system itself rest with the approved fire-protection authority.
How long does a system last before it needs replacing?
Well-installed speakers and cabling run ten years or more. Amplifiers and source equipment have shorter lives because of use and heat. Renewal is usually partial: the amplifier is replaced while the speakers and cabling stay exactly as they are.
Get a Free Quote
Prefer a fast reply? Message us on WhatsApp.
Related services
Smart Home & Automation
Automation that works and keeps working: lighting, climate, blinds and security under one controller, built on local control rather than someone else’s cloud.
Software Development
Systems and websites built to solve one specific operational problem in your business — right-sized, realistically budgeted, and actually finished.
ZATCA E-Invoicing
We make your systems Phase 2 compliant and integrate them with the Fatoora platform, meeting every technical requirement.
Ready to start your project?
Talk directly to an engineer — not a sales desk. Initial consultation, site survey and a detailed quotation, with no obligation.
Out-of-hours emergency support available to maintenance-contract clients